nnnnnnElite Medicannnnnn

Elite Implant - the mini implant

 
 
 
 
 
 
DECONTAMINATION ACIDIFICATION CYTOTOXICITY STERILIZATION ISTRUCTIONS - PACKAGING

 

implant mount screw

 

 

 
implant mount

elite implant is the Elite Medica's mini-implant

with diameter 3,25

elite implant is an acid etch implant.

our acid etch superficially treatment is the

"Fastite acid etch".

 

" FASTITE " ACID ETCH

 

 The innovative Fastite surface is realized with a double passage of acid etch treatment, a passage of passivation and a final treatment of Ar-plasma decontamination. The procedures of grit blasting are not effected because they have shown evident limits as the contamination of the surface treated by the particles used during the procedure, which they are englobed, during the impact, in the same surface, creating non homogeneous surfaces that can weak the structure of the implant besides.
The Fastite surface, after a series of clinical multicentrices studies on 5.000 implants, have brought a percentage of very elevated success after 12 months from the prosthetic load, underlining the possibility to load the implants after 60 days from their insertion.
The Fastite acid etched surface appeared to provide stronger anchoring in the bone and also offering important clinical advantages in bone of low quality because favours the formation of compact bone along the central coils and in the apical zone of the implant.

DIAMETERS AND LENGHTS

DIAMETERS (mm.)
LENGHTS (mm.)

ELITE INSTRUCTIONS FOR USE

External box:

the implant is in a glass phial externally packaged. The red circular label identifies gamma irradiation sterilized condition. The box includes two adhesive labels with implant data and the use instructions.

 Open the package and take the glass phial. Unscrew the cap. You find the Elite implant inserted on the titanium cylinder with his implant mount premounted on the platform of the implant. Capture the Elite implant with the Friction Hand Wrench (Cod. CHV777-1) or with the motor adaptor short or long (Cod. DDM01-DDM02).

After the surgical insertion of the Elite implant extract the titanium cylinder from the glass phial.
The cover screw is screwed on the
bottom side of the titanium cylinder.

Unscrew the cover screw with the Long Handle Driver or with the Contra Angle Driver short or long (cod. DVR888 or cod. CDM01-CDM02).
Screw the cover screw on the platform of the Elite implant ending the surgical site by suture.

ELITE RADIOGRAFIC TRASPARENCIES

ELITE IMPLANT CODES

ELITE 3,25
GPG008
ELITE IMPLANT DIAMETER 3,25 X 8,0 mm.
GPG010
ELITE IMPLANT DIAMETER 3,25 X 10 mm.
GPG012
ELITE IMPLANT DIAMETER 3,25 X 12 mm.
GPG014
ELITE IMPLANT DIAMETER 3,25 X 14 mm.
GPG016
ELITE IMPLANT DIAMETER 3,25 X 16 mm.
GPG018
ELITE IMPLANT DIAMETER 3,25 X 18 mm.