Fastite Implant

nnnnnnElite Medicannnnnn

Fastite Implant

HOME

COMPANY

PRODUCTS

CERTIFICATIONS

FASTITE implant

ELIFAST implant

ELITE implant

DECONTAMINATION

ACIDIFICATION

CYTOTOXICITY

STERILIZATION

ISTRUCTIONS - PACKAGING

DOUBLE THREAD:

Reduces the time necessary for the insertion of the implant

Fastite implant is an acid etch implant.

Our acid etch superficially treatment is the "Fastite acid etch".

Fastite Implant is the evolution of the Implant System more utilized in the field of Dentistry Implantology.

Fastite Implant System is in compliance with all the Quality Biomedical Sector Standards.

Fastite Implant System exceed the highest standards set by the European Community and other international agencies starting from the use of the materials until to the surface- decontamination and sterilization treatments .

Made of pure titanium in compliance with the standard ASTM F67 grade 4

" FASTITE " ACID ETCH

	The innovative Fastite surface is realized with a double passage of acid etch treatment, a passage of passivation and a final treatment of Ar-plasma decontamination. The procedures of grit blasting are not effected because they have shown evident limits as the contamination of the surface treated by the particles used during the procedure, which they are englobed, during the impact, in the same surface, creating non homogeneous surfaces that can weak the structure of the implant besides. The Fastite surface, after a series of clinical multicentrices studies on 5.000 implants, have brought a percentage of very elevated success after 12 months from the prosthetic load, underlining the possibility to load the implants after 60 days from their insertion. The Fastite acid etched surface appeared to provide stronger anchoring in the bone and also offering important clinical advantages in bone of low quality because favours the formation of compact bone along the central coils and in the apical zone of the implant.

INSERT-GRIP SYSTEM

It eliminates the use of the implant mount improving the view of the operating field. The Insert-Grip reduces time of insertion facilitating the procedural passages.
The conical hexagonal tip of the Insert-Grip System is designed to catch and to insert the cover screw fixed on the bottom of the titanium cylinder inside the package.

DIAMETERS AND LENGHTS

DIAMETERS (mm.)

wpe5.jpg (4599 byte)

wpe8.jpg (4619 byte)

LENGHTS (mm.)

FASTITE INSTRUCTIONS FOR USE

External box:

the implant is in a glass phial externally packaged. The red circular label identifies gamma irradiation sterilized condition. The box includes two adhesive labels with implant data and the use instructions.

Open the package and take the glass phial. Unscrew the cap. You find the Fastite implant inserted on the titanium cylinder.

Capture the Fastite implant with the handle insert-grip system (Cod. IBDDM07) orwith the motor adaptor insert-grip system short or long (Cod. 901822 - 901823).

After the surgical insertion of the Fastite implant extract the titanium cylinder from the glass phial.
The cover screw is screwed on the
bottom side of the titanium cylinder.

Unscrew the cover screw with the hexagonal apical zone of the handle or motor insert -grip system (cod. IBBDM07 or cod. 901822-901823).

Screw the cover screw on the platform of the Fastite implant ending the surgical site by suture.

FASTITE RADIOGRAFIC TRASPARENCIES

FASTITE IMPLANT CODES